Force Sensor

The FlexiForce® sensor has an ultra-thin construction with flexible printed circuit and can measure force between almost any two surfaces and is durable enough to stand up to most environments.

FlexiForce® Sensor

FlexiForce® sensors are utilized in many applications to:

  • Detect and measure a relative change in force or applied load
  • Detect and measure the rate of change in force
  • Identify force thresholds and trigger appropriate action
  • Detect contact and/or touch

FlexiForce sensor is only available as a wired option, connecting to DataLOG, DataLINK, Amplifier or other third-party instrumentation.

Product Specifications

Standard Force Ranges 0-25 lb. (110N)
0-100 lb. (440N)		 Thickness 0.208mm
Length 197mm*
(optional trimmed lengths 152mm, 102mm, 51mm)

*Does not include pins, please add 31.75mm for pin length to equal a total length of 203.2mm		 Width 14mm
Sensing Area 9.53mm diameter Connector 3-pin male square pin (center pin is inactive)
Substrate Polyester (ex: Mylar) Pin Spacing 2.54mm
Linearity (error) < ± 3% Repeatability < ± 2.5% of full scale
Hysteresis < 4.5% of full scale Drift < 5% per logarithmic time scale
Response Time < 5 µsec Operating Temperature 15°F - 140°F (-9°C - 60°C)
Wireless Connection Not compatible Wired Connection Highliy flexible cable, length 1.25m (custom lengths on request)
Wireless Interface Not compatible Wired Interface DataLOG, DataLINK, Amplifier or 3rd party

Quote Request

* These fields are required.