Unique Solutions for Clinical And Research Applications - Biometrics Ltd.
ForcePlate, MyoMeter, Pinchmeter & Hand Dynamometer
Biometrics Ltd manufacture a range of precision load cell based devices to connect to the DataLOG, DataLINK, and K800. Multiple devices may be used simultaneously - for example four ForcePlates for multiaxial measurements of symmetrical weight distribution or two dynamometers for simultaneous bilateral dynamic grip strength testing. The ForcePlate connects using the H2000 lead. The MyoMeter, Pinchmeter and Dynamometer connect using the H1800 Interconnect Lead.
ForcePlate FP3
| Dimensions | 125 x 200 x 14 mm |
| Mass | 790 g |
| Accuracy | ± 0.3% Rated Load |
| Rated Load | 0 to 100 Kg or 0 to 220 lb |
| Cable | Direct connection to DataLOG, DataLINK and K800 using cable type no. H2000 |
The FP3 is a small lightweight single axis force plate designed for maximum portability
and versatility of application. The FP3 ForcePlate measures as little
as the touch of a finger through to full standing weight bearing. The small
size allows use in any position for upper or lower extremity measurements.
Multiple FP3 can be used to increase the data collection options. Use of two forceplates provides easy measurement of bilateral upper or lower limbs. Combining four FP3 ForcePlates allows continuous dynamic measurement of anterior/posterior and medial-lateral weight distribution.
Myometer M500
The M500 allows the user to quantify the force applied during Manual Muscle Testing. Manual Muscle Testing is a procedure for the evaluation of the function and strength of individual muscles and muscle groups based on effective performance of a movement in relation to the forces of gravity and manual resistance.
The M500 MyoMeter is held by the examiner with the curved anvil placed against the body part to be tested.
The limb is stabilized and held in the desired starting position. The patient is instructed to
hold the limb in position and resist the force applied by the examiner. The examiner applies force
gradually until the limb is depressed. The force required to move the limb is referred to as the
“breaking force”.
| Dimensions | 115 x 65 x 32 mm |
| Mass | 250 g |
| Accuracy | Better than 1% Rated Load |
| Rated Load | 0 to 500N, Calibrated and designed to work in compression only) |
| Anvils | 1 small, 1 large |
| Cable | Direct connection to DataLOG, DataLINK and K800 using cable type no. H1800 |
The M500 MyoMeter is supplied with two anvils:
1 x general purpose (small)
1 x general purpose (large)
By connecting the M500 MyoMeter to the DataLOG or the DataLINK and using the management & analysis
software, force may be displayed and analysed in units of Newtons, Kg or lb. The M500 may also be
connected to the general purpose amplifier K800
for direct connection to 3rd party instruments
such as A/D cards
Precision Dynamometer G100
The Biometrics Dynamometer utilises precision load cell technology to increase the sensitivity and accuracy of measurement of even very low grip strength forces. By using the industry standard Jamar design exterior researchers can compare with standardised normative data. Total accuracy is better than ± 1%. Full scale 0-90Kg or 0-200lbs.
| Dimensions | Standard Jamar configuration, calibrated and designed to work in compression only |
| Mass | 630 g |
| Accuracy | Better than 1% Rated Load |
| Rated Load | 0 to 90 Kg or 0 to 200 lb |
| Cable | Direct connection to DataLOG, DataLINK and K800 using cable type no. H1800 |
Precision Pinchmeter P100
| Dimensions | diameter 45 X 6 mm |
| Mass | 65 g |
| Accuracy | Better than 0.6% Rated Load |
| Rated Load | 0 to 22.5 Kg or 0 to 50 lb |
| Cable | Direct connection to DataLOG, DataLINK and K800 using cable type no. H1800 |
The unique electronic pinchmeter has a low profile design that enables the researcher to accurately
quantify pinch strength at closer to end range than any other device. The total accuracy is
better than 1%. Full scale 0-20Kg or 0-50lbs.